CO2 Removal Plant – Marino
New plant for the removal of carbon dioxide with capacity of 60l/s at the Campo Resi purifier in the municipality of Marino, consisting of:
- the interception of water from the wells on the existing HDPE pipes and the introduction of 5 new interception valves (raw water from the wells towards the processing plant, bypass and flow regulation)
- insulated and conditioned container, containing:
- 3-stage filtration system:
- Pre-filtering
- Fine filtration
- Activated charcoal filtration
- Fans of the impeller type with backward curved blades with high aeraulic efficiency
| Nominal flow rate | 10,000 m3/h |
| Hydraulic head | 2.000 Pa |
| Installed power/td> | 11,0 kW |
| Motor supply voltage | 400 V type IE2 under inverter for each fan |
| Frequency | 50 Hz |
| Protection | IP 55 |
| Rotation | 1,450 rpm |
| Container dimensions | 1,000x100x1.200(h) mm |
| Installation height | 425 m above sea level |
- Electrical panels
- Management and control
- Electric pumps with single-stage screw inverter operation. Nominal flow rate 124 m3/hr, efficiency class IE3
- 2 cold atmospheric degassing towers for CO2 stripping, made of polypropylene, each with the following dimensions, total height 5,200 mm, stripping column with a diameter of 1,900 x 3,450(h) mm and collection tank under column with a diameter of 2,500 x 1,500(h) mm.
